Site icon Zen Realty Online

Cool it: Tips to stay ahead of hot, humid days at home

Cool it: Tips to keep your home cool in the tropical climate of the Philippines

IN the Philippines, heat and humidity are givens. They’re also the reasons why our electric bills tend to go up during summer months.  But there are homes that are cooler than others throughout the year. Their secret? Climate-conscious design.

“Some designs just don’t make sense in a tropical climate like ours,” said architect Gelo Mañosa, son of renowned designer Francisco “Bobby” Mañosa, and CEO of Mañosa & Co. “When designing a home, you need to keep in mind the conditions that surround it. A house designed, for say, Finland, might be beautiful, but not appropriate for the reality of Philippine climate.”

Mañosa said there are three important factors to consider when designing for hot and humid climates: direct solar radiation, orientation, and wind direction.

TO WINDOW OR NOT TO WINDOW. The more openings in a house, the better the air flow. But too many windows also bring in heat. Find the design balance between the two:  to create more efficient air flow, thus a cooler home.

“If you want a cooler home, maximize passive cooling and minimize ‘heat gain,” he advised. “A well-thought-out design, which includes choosing the right materials, proper sun protection, landscape design and proper orientation, can make an enormous difference.”

Mañosa gave 10 tips for creating cooler homes, that could shave off  pesos from your airconditioning costs.

Use light colors for your home’s exterior

“One of the biggest mistakes a person can make in a country like ours is to use dark colors for external walls,” said Mañosa. Dark colors absorb the sun’s energy and retain heat for much longer. Stick to light colors, which reflect the heat from the sun and keep it away from your home.

Insulate your building envelope

The building envelope is the physical separator between the interior and the exterior environments of a structure. “A well-insulated building envelope gives you less heat gain, so your home cools faster and your appliances don’t have to work as hard,” Mañosa said.

Insulating an already existing structure can be costly, depending on the method you choose – but it’s well worth the investment in the long run. “If you’re looking for a quick and relatively economical fix to an existing roof, look into a polyurethane foam spray for your roof,” he said. “Aside from waterproofing, it also helps to insulate your home from the sun’s heat.”

Create shade

“Keep the sun away from your house,” Mañosa said. The cooler you can keep the interior of your house, the less you have to spend on air conditioning. Indoor shade is helpful, but doesn’t keep the heat out. “External shade — eaves, overhangs, sunshades, even trees and plants to block the sun’s rays … these are more effective,” he added.

Allow for cross ventilation

Cross ventilation is a natural form of wind ventilation that drives air from openings at one side of a structure through to the other. Its success depends on the tightness of the building envelope, the position and size of your openings (windows, doors, vents) as well as the path in between the two sides of the house.

“You need to know beforehand the direction in which the wind blows. It goes without saying that cross ventilation is only effective if you actually keep your openings open,” Mañosa  said.

When wind enters through a smaller opening and exits through a bigger opening, that’s a ‘squeeze point.’ This creates a natural vacuum which increases wind velocity.

“We usually incorporate squeeze points into our designs, but in an existing home, you can create the same effect by opening the window or door receiving the breeze a little less than the one on the opposite wall,” Mañosa  ”One needs to understand where the wind comes from at different times of the year, as the wind changes depending on the month.”

Let wind enter at an oblique angle

You get better air circulation when the wind enters the opening of your structure at an oblique angle of about 45-50 degrees. When wind passes through an oblique angle, it causes interior air to be more turbulent, allowing air to hit the corners of the structure.

Create a stack effect

A stack effect is when warmer, lighter indoor air is displaced by cooler and denser outdoor air. If you create an opening high in the building and another low in the building, this causes a natural flow. If the air inside your structure is hotter than the air outside, the stack effect will make it float out the top opening, to be replaced with cooler air from outside.

Use fans to promote better airflow

Hot air rises and escapes through the higher parts of your home. You can help it escape faster by pushing the air upwards with the use of fans. If you have standing fans, position them to move the hot air in the direction you want it to go (up). If you have a ceiling fan, it should be spinning counter-clockwise to push hot air up and out.

Landscape

Let air pass through shaded areas to keep the air cool. Trees, if properly placed, can be used to cool incoming air. Vegetation can also be used to funnel wind and free air movement maintained around the structure.

Plants and grass also greatly reduce ground temperature, compared to hard surfaces like concrete which have more heat gain.

 Buy and use appliances wisely

Despite having all these design features incorporated into your home, there really will be days that it’s just too hot,” Mañosa said.  This happens more often in this age of climate change and global warming.

“If you have to use air conditioning regularly, consider investing in Inverter type air-conditioning combined with solar energy, which is getting more and more affordable as the years go by,” he said.

Look for energy star-rated appliances, and minimize the use of energy sucks like mini-oven toasters and other heating appliances. Making energy-conserving changes to your lifestyle can help to balance things out.

Source: http://thestandard.com.ph/real-estate/218219/cool-it.html

Exit mobile version